"I need a 200-watt lamp" is a phrase from the incandescent era. Back then, wattage really did predict brightness: every lamp in the range was equally inefficient, and 200 W was always brighter than 100 W. With LEDs, that rule no longer holds.

Lumens — how much light a source emits

Luminous flux is measured in lumens (lm) and shows how much light a luminaire emits in all directions. A modern Philips LED floodlight delivers up to 145–154 lumens per watt; a cheap unbranded one delivers 80–90, or even less. Two "200 W" floodlights can differ in light output by almost a factor of two.

So the first rule of selection: compare lumens, not watts. Watts are what you pay for on the meter. Lumens are what you get.

Lux — how much light reaches the surface

Illuminance is measured in lux (lx): one lux is one lumen per square metre. Lux is what every standard specifies:

  • a football pitch for international matches with TV broadcasting — 2000–2500 lx (Bunyodkor Stadium has 2500 lx);
  • national league matches — 800–1200 lx;
  • an office workstation — 300–500 lx;
  • a warehouse with aisles — 150–200 lx.

Importantly, you cannot "buy lux in a shop". Lux results from lumens, mounting height, optics and the geometry of the site. The same floodlight will produce completely different illuminance on a pitch depending on where and how it is installed.

Why you need a lighting calculation

That is why a serious project starts not with choosing a luminaire but with a lighting calculation: a model of the site, the illuminance and uniformity standards, the choice of optics — and only then the equipment specification. That is how we work, and that is how Philips works on world-class stadiums.

A calculation, done free of charge, will also show the reverse: whether you are overpaying. It often turns out that well-placed luminaires with the right optics meet the standard with fewer units and less power.

Conclusion

It is easy to remember: lumens belong to the luminaire, lux to the surface, and watts to the electricity bill. Choose lighting based on the lux your site needs, not the watts on the box.